Tag: CTF3
-
CLIC linac systems
CLIC linac systems The CLIC linac systems activity comprises work on the main linac two beam module, the drive beam injector including the drive beam rf power source and main beam injector studies. Our team build several prototype two beam modules which are tested with and without beam. The focus is on the thermo-mechanical behaviour
-
CLIC experimental verification
CLIC experimental verification The objective of the Experimental Verification activity is to conduct system tests at CERN and elsewhere – in most cases with beams – in order to validate the CLIC scheme and provide feedback to design and hardware development studies. The main activity is centered on the CLIC Test Facility CTF3, built at
-
106
106 2014 CTF3-Note-106 Commissioning of inductive BPMs in the TBTS probe beam line CTF3-Note-105 Ideas about measuring short range wake fields in accelerating structures for hugh-energy and free-electron laser linear accelerators 2012 CTF3-Note-104 Experimental Results at the CERN Photoemission Laboratory with Co-deposition Photocathodes in the Frame of the CLIC Studies CTF3-Note-103 A Segmented Beam Dump
-
060
060 2003 CTF3-Note-060 Analytical Design of a Confocal Resonator CTF3-Note-059 Measurement and Calibration of the Corrector Magnets and the Chicane Dipole Magnets for CTF3 CTF3-Note-058 Studies of OTR Angular Distribution on CTF2 CTF3-Note-057 OTR from Non-Relativistic Electrons CTF3-Note-056 An Inductive Pick-Up for Beam Position and Current Measurements CTF3-Note-055 A New Wide Band Wall Current Monitor
-
098-091
098-091 2008 CTF3-Note-091 Optics Design of Transfer Line-2 for CTF3 2007 CTF3-Note-090 Technical Specification for the Supply of a S-Band Variable Attenuator CTF3-Note-089 Cesium-Telluride Photocathode No 166 CTF3-Note-088 Minutes of CTF3/CALIFES meeting held at CERN on 04 April 2007 2006 CTF3-Note-087 Status of 30 GHz High Power RF Pulse Compressor for CTF3 CTF3-Note-086 Automatic Conditioning
-
CTF3 general description
CTF3 general description The CLIC Test Facility 3 (CTF3) is primarily a scaled version of the CLIC drive beam complex. It produces the high-current drive beam that generates the 12 GHz RF power for the CLIC accelerating structures. CTF3 first accelerates a 4 A beam up to 120 MeV, in a fully loaded linac with
-
076
076 2006 CTF3-Note-076 Status Report of the CTF3 Test Beam Line CTF3-Note-075 Beam Dynamics and First Operation of the Sub-Harmonic Bunching System in the CTF3 Injector CTF3-Note-074 Beam Dynamics Studies and Emittance Optmization in the CTF3 Linac at CERN CTF3-Note-073 Commissioning Status of the CTF3 Delay Loop CTF3-Note-072 Layout of the Long Optimal Lines in
-
040
040 2001 CTF3-Note-040 CTF3 Preliminary Phase Commissioning. Report on Third Week, 29 Oct – 2 Nov 2001 CTF3-Note-039 CTF3 Design Report – Preliminary Phase CTF3-Note-038 Visit to Thales Electron Devices for Klystron Reception (Upgrade of TH2100 SER.No.040, 37 MW to 45 MW), 9.11.2001 CTF3-Note-037 CTF3 Preliminary Phase Commissioning – Report on Second Week, 8-12 Oct
-
CTF3
CTF3 stopped its operation at the end of 2016 after successfully completing its programme. Analysis of data and results are still on-going and will be an integral part of the CLIC project plan by the end of 2018. Some future measurements for CLIC will take place using the new user facility CLEAR.
-
017
017 2000 CTF3-Note-017 CTF3 Project Information Management Proposal CTF3-Note-016 The Solenoids in the Bunching Section of the LIL CTF3 Injector CTF3-Note-015 Updated Beam Dynamics for CTF3 Injector CTF3-Note-014 Wall Current Monitors for CTF3 CTF3-Note-013 New Measurements of the LIL Bunch Length and Lattice Parameters CTF3-Note-012 Timing for CTF3 Preliminary Phase CTF3-Note-011 Proceedings of the Third